Guides · 15 November 2026
Hobbs time vs tach time vs flight time — which goes in your logbook?
Our app is named after the Hobbs meter, so we get this question a lot. Three clocks run on a light aircraft, and only one of them is what your regulator calls flight time.
The three clocks
- Hobbs meter. An hour meter that runs whenever the engine is running (or, in some aircraft, when there's oil pressure or the master is on). It records real clock time. Many flying clubs and rental operators bill by it.
- Tach (tachometer) time. Engine time scaled by RPM: at cruise RPM a tach hour is close to a clock hour; at idle it runs slower. Maintenance intervals and some rentals use it. A flight usually shows less tach time than Hobbs time.
- Air time. From wheels off to wheels on.
What you log as flight time
- Canada (CARs): flight time is from when the aircraft first moves under its own power for the purpose of taking off until it comes to rest after landing. That's close to Hobbs time for a typical flight, but not the same thing.
- United States (FAA, 14 CFR 1.1): flight time is pilot time that starts when an aircraft moves under its own power for the purpose of flight and ends when it comes to rest after landing. Again, close to Hobbs time, not tach.
- EASA: block time — from the moment the aircraft first moves for the purpose of taking off until it finally comes to rest at the end of the flight.
In all three, the logbook clock starts when the aircraft first moves for the flight, not when the engine starts. Time warming up on the ramp before you move, or sitting with the engine running after you've stopped, is on the Hobbs meter but is not flight time. Once you're moving for the flight, the run-up and a wait at the hold both count.
Why your logbook and your rental bill don't match
The rental is billed by a meter; your logbook records flight time by the regulator's definition. A tenth or two of difference per flight is normal. Logging the Hobbs reading every time is common and usually close enough, but it can overstate your time slightly; logging tach understates it.
What Hobbs (the app) does
If you let it, Hobbs notices take-off and landing with your phone's GPS and offers the flight with times filled in for you to confirm or adjust. When you import from Flightradar24, it shows both the air time and the first-to-last-contact (block) time so you can choose what fits your regulator's definition. Every total in the app, from PIC to night, adds up whatever you entered.